Composite fireproof glass is still widely used in daily life, but the glass is very contaminated with dust and stains. Do you know how to wipe the glass?
Generally, the glass windows in the home need to be wiped regularly. The dust and other stains on the composite fireproof glass will affect the beauty of the whole home. Many people may have encountered such questions. After wiping the composite fireproof glass, they found that many hairs of the dishcloth were absorbed on the glass.
The little trick of cleaning glass is to start with something. Choosing the right thing can achieve twice the result with half the effort. General families choose to wipe the glass with a rag. They should prepare two rags together, one dry and one wet. First wipe the composite fireproof glass with a wet rag, and then dry it with a dry rag. The focus is to dry it with a dry rag when the glass is not dry.
The trick of wiping composite fireproof glass is to remove the stains without effort: wipe the glass with a towel dipped in beer or warm vinegar to remove the dirt on the glass. The composite fireproof glass is first coated with chalk, grey water or gypsum powder, and then wiped with a cloth after drying, so that the glass can be wiped clean. Put some water in the washbasin, pour in a small amount of shampoo, mix it, and wipe the glass with it. It will look very clean and bright. In winter, the surface of the composite fireproof glass is easy to frost. You can wipe it with a cloth dipped in concentrated salt water or Baijiu. The effect is very good.
The scale on the composite fireproof glass can be wiped clean and bright with cloth or silk return dipped in toothpaste. Take one dry and one wet cloth, and wipe both sides of the glass with a wet cloth first; Then dip a small amount of Baijiu with a dry cloth and wipe the glass hard to make it clean and bright. Wipe the dirt on the glass mirror. If there is dirt on the small mirror or cabinet mirror, it can be wiped with soft cloth soaked in fire oil or dipped in wax. It must not be wiped with water. It is not only the mirror surface of the composite fireproof glass is blurred, but also easy to corrode the glass
Article source: composite fireproof glass http://www.ba-glass.com/
05-04
What are the problems of composite fireproof glass in fire fighting
Some supervisors mistakenly think that the door made of fireproof glass is the fireproof door, the partition made of fireproof glass is the fireproof glass partition, and the window made of fireproof
04-12
Fireproof glass door: how to ensure that the fireproof door can play a role in critical times
How to ensure that the fire door can give full play to its ideal effect in critical time?1. Select appropriate typesAccording to the relevant specific introduction of fire doors, we can know that at t
02-17
Where is the fireproof glass generally installed
(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window ar
10-30
How to distinguish the quality of single fireproof glass?
1. Equipment conditions:No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't mak